How many HP does my room need?

The right size is the difference between a cool room and an aircond that runs non-stop or switches off too early. Start from the floor area, then adjust for heat.

By the RTi Services team

Start with floor area

These are guide ranges used for homes in Malaysia, not an engineering load calculation. A technician confirms the size on site.

  • 1.0 HP (about 9,000 BTU): up to roughly 150 sq ft
  • 1.5 HP (about 12,000 BTU): about 150 to 250 sq ft
  • 2.0 HP (about 18,000 BTU): about 250 to 350 sq ft
  • 2.5 HP (about 22,000 to 24,000 BTU): about 320 to 450 sq ft

When to go up one size

Move up one size if the room has a window facing west (afternoon sun), is on the top floor or under the roof, or has a ceiling higher than about 10 ft. Heat gain from these makes the same floor area harder to cool.

Why not just buy bigger?

An oversized unit cools fast, reaches the set temperature and switches off before it has removed much moisture. It then restarts again and again (short-cycling), which wastes power and can leave the room damp. An undersized unit runs flat out and still struggles in the afternoon.

Try it with your own room

Our room estimator shows a recommended size, the running cost and a live picture of the cool air reaching your room.

Appointments by WhatsApp

Ready to book your service?

Chat with us on WhatsApp and ask about available slots and a quote.

Get a quote (opens WhatsApp in a new tab) Call +60 13-701 4823